- Technical Guide
- Fire
- Fire
FD90 Intumescent Seal Specification
Selecting the correct intumescent seal specification is essential for achieving your required fire resistance rating. For FD90 rated doors (providing 90 minutes of fire resistance), the specification varies depending on your door configuration and frame type.
Published 03 September 2023
Selecting the correct intumescent seal specification is essential for achieving your required fire resistance rating. For FD90 rated doors (providing 90 minutes of fire resistance), the specification varies depending on your door configuration and frame type.
Our comprehensive specifications ensure that every fire door installation meets the highest safety standards while providing the protection you need. Whether you're working with single doors, double doors, or configurations with overpanels, we'll help you select the right intumescent seal solution.
Intumescent Seal Specification for FCW90 Door Leaves Installed in Timber Frames
Location | Size and Position |
Stiles/Frames |
Forza PVC-seals |
Head/Frame |
Forza PVC-seals |
Base/Door |
Forza Palusol |
Square meeting stiles |
Forza PVC-seals |
Transom/Frame |
Forza PVC-seals |
Intumescent Seal Specification for FCW90 Door Leaves Installed in Composite Frames
Location | Size and Position |
Stiles/Frame |
Forza PVC-seals |
Head/Frame |
Forza PVC-seals |
Base/Door |
Forza Palusol |
Square meeting stiles |
Forza PVC-seals |
Transom/Frame |
Forza PVC-seals |
Intumescent Seal Specification for FCH90 Door Leaves Installed in Steel Frames
Location | Size and Position |
Stile/Frame |
1no 60 x 1 mm surface fitted centrally in the frame reveal |
Head/Frame |
1no 60 x 1 mm surface fitted centrally in the frame reveal |
Base/Door |
1no 50 x 1 mm intumescent seal fitted centrally in the bottom edge of the leaf |
Intumescent Seal Specification for FCH90 Door Leaves Installed in Timber Frames
Location | Size and Position |
Head/Frame |
1no 25 x 6 mm intumescent seal fitted 8 mm in from the opening face of the frame |
Stiles/Frame |
1no 25 x 6 mm intumescent seal fitted 8 mm in from the opening face of the frame |
Head/Door |
1no 15 x 6 mm intumescent seal fitted 40 mm in from the opening face of the leaf |
Stiles/Door |
1no 15 x 6 mm intumescent seal fitted 40 mm in from the opening face of the leaf |
Bottom edge of leaf |
1no 50 x 2 mm intumescent seal fitted centrally in the bottom edge of the leaf |
Square meeting stiles |
1no 15 x 6 mm intumescent seal fitted 40 mm in from the opening face of the closing edge of the active leaf, and; |
Transom/Frame |
1no 15 x 6 mm intumescent seal fitted 40 mm in from the opening face of all four sides of the overpanel edge, and; |